PAR
AMMETRIC CLAMP
The PAR ammeter clamp was specially developed for the aluminum industry to control the cathodic distribution on the electrolisys cells, or anodic around the anode.
Associated with an EDP-FLUX (data logging fluxmeter) from Serem Electronics, it allows to measure direct currents up to 40KA.
Its square or round shape, its length and its small thickness allow measurements to be taken on cathode conduction bars, over the tank floor and through gratings or around the anode without getting tired.
The ROTATIONAL shape is the LIGHTEST with only 25mm of thickness for a weight of 4.7kG
Associated with an EDP-FLUX (data logging fluxmeter) from Serem Electronics, it allows to measure direct currents up to 40KA.
Its square or round shape, its length and its small thickness allow measurements to be taken on cathode conduction bars, over the tank floor and through gratings or around the anode without getting tired.
The ROTATIONAL shape is the LIGHTEST with only 25mm of thickness for a weight of 4.7kG
PAR
Specific References
- MPN
- 100485
New product
AMMETRIC CLAMP